Author: cengiz

NMEA Yokogawa Gyro Converter is used to NMEA heading information to Yokogawa gyro format. It also converts Yokogawa gyro format to NMEA heading information. In this way, the installed devices are not affected by the retrofit. Operating modes can be set by jumper settings. NMEA Yokogawa gyro converter accepts HDT, ROT, THS telegrams...

NTT-22 NMEA TOKIMEC CONVERTER NMEA Tokimec gyro converter is used to NMEA heading information to Tokimec gyro format. It also converts Tokimec gyro format to NMEA heading information. In this way, the installed devices are not affected by the retrofit. Operating modes can be set by jumper settings. NMEA Tokimec gyro converter...

NMEA Wifi Bridge – Gateway – Transponder UNIMAX NW-22 is a smart NMEA to Wifi bridge. It sends every NMEA message it receives to the WiFi devices it is connected to. NMEA Wifi Bridge allows you to see NMEA data such as GPS, AIS in marine software applications. Compatible with...

UNIMAX NCC-22 NMEA CRC Checksum Calculator NMEA Checksum Calculator, calculates the checksum of NMEA sentences not including checksums and sends them to the output. Especially in some older bridge navigation devices, NMEA data is sent without checksum calculation.In addition, data from machinery and alarm systems are usually sent to VDR,...

UNIMAX NBC-22 NMEA Baudrate Converter NMEA baudrate converter is used to send and receive NMEA data with different baud rates. Input and output speed can be adjusted according to the desired speed. Configurable independently input and output speed 4800bps to 115200bps. The embedded software can be updated according to the...